Esteem Drying Oven

Suitable for heat treatment, baking and drying applications in Industries or Institutes engaged in the production of Vaccines. Tablets, Bottle Sterilizing, Baking Breads or Biscuits, Drying Chemicals, PCB Processing, Armature Windings, Soaking electronic components like Yoke, Coils, EHT Coils, Transformersetc

CONSTRUCTION:

The construction is Triple walled on sturdy angle iron frame with both inner SS 304 and outer with MS Power Coated as per GMP Model. The inner wall is painted with high temp. Aluminum paint to withstand long duration heating cycles normally required in industrial applications, and the outer wall is finished with powder coated paint. The 50-75 mm gap between the two walls is filled with high grade mineral wool insulation to prevent loss of heat and thereby saving energy. Air is circulated by a heavy duty blower to maintain inside temperature uniformity with a minimum temperature gradient throughout the working chamber. Brackets to support the heavily laden perforated trays at different height are provided on the sides of the inner chamber. The front door with sturdy hinges is also double-walled with gap between the two walls filled-in with high grade mineral wool insulation. Door with handle and silicon gasket.

HEATING
Heating is done by Tubular air heaters placed in the moving air path. These are interlocked with blower. Ventilation with adjustable opening on the top facilities fleeing of any fumes or vapors produced.

TEMPERATURECONTROL
The temperature is controlled by fine capillary hydraulic type imported thermostat with an accuracy of 5°Cover a range of 50°C to 250°C +/-1°C to 5°C. Temperature is indicated by Dial Thermometer. The equipment is testedforContinuous performance & safe operation in out most modern testing laboratory. It is securely packed to avoid any transit damage during dispatch.

CONTROLPANEL
The Control panel include a Main switch to ON/OFF the unit, mains indicator, a dial type thermometer, Temperature control knob of thermostat is calibrated in the factory after actually observing the temperature in steady state. With LCD/LED touch screen ,HMI

POWERSUPPLY
The unit is supplied complete in all respect. It is suitable to work on 220V, 50 Hz single phase or 410- 440V,50Hz, three phase Ac depending upon the size.

OPTIONALACCESSORIES
• Timer
• Digital Indictor in lieu of dialthermometer.
• Temperature Indicator cum Controller Digital in lieu of thermostat & dial thermometer